Only sawtooth oscillators are enabled, resulting in a harmonically rich content.
Volume level for oscillator 2 is manually set to 192.
Tone for oscillator 2 is manually set to 100.
Amplification level is set to 6dB (255) and is modulated by VCA Env.
VCA Env direct modulation amount for amplification level is 255.
Pan spread is manually set to 34.
Oscillators 1 range is 8'.
Oscillators 2 range is 4'.
Noise level is manually set to 27.
High-pass filter cut-off frequency is set to 128.49Hz (103) and is modulated by Mod Env.
Mod Env mod-matrix 1 modulation amount for high-pass filter cut-off frequency is 0.
Low-pass filter cut-off frequency is set to 61.77Hz (9) and is modulated by Note Vel, LFO 2, VCF Env.
LFO 2 direct modulation amount for low-pass filter cut-off frequency is 59.
VCF Env direct modulation amount for low-pass filter cut-off frequency is 169.
Low-pass filter envelope amount is modulated by Note Vel.
Note Vel direct modulation amount for low-pass filter envelope amount is 196.
Filter resonance is statically set to 27% (70).
Unison detune level is manually set to ±16 cents (84).
Oscillators drift level is manually set to 27. Drift rate is 0
Oscillator 2 pitch is set to 12 semitones and is modulated by LFO 1.
LFO 1 direct modulation amount for oscillator 2 pitch is 15.
FX mode is set to Send, and routing is
Effect 1 level is off. Effect 2 level is off. Effect 3 level is manually set to 42. Effect 4 level is manually set to 27.
not yet complete
not yet complete
Controls VCF Cut-off Frequency, VCF Envelope Velocity Sensitivity, VCA Envelope Velocity Sensitivity.
function | type | destination | amount |
---|---|---|---|
timbre | fader-indirect | VCF Cut-off Frequency | 169 |
menu | VCF Envelope Velocity Sensitivity | 196 | |
menu | VCA Envelope Velocity Sensitivity | 58 |
Controls OSC 2 Pitch.
function | type | destination | amount |
---|---|---|---|
pitch | fader | OSC 2 Pitch | 15 |
name | value |
---|---|
LFO 1 Rate | 8.15Hz (183) |
LFO 1 Delay / Fade | 0s (0) |
LFO 1 Shape | Triangle |
LFO 1 Key Sync | off |
LFO 1 Arp Sync | off |
LFO 1 Mono Mode | 0 |
LFO 1 Slew Rate | 0 |
Controls VCF Cut-off Frequency.
function | type | destination | amount |
---|---|---|---|
timbre | fader | VCF Cut-off Frequency | 59 |
name | value |
---|---|
LFO 2 Rate | 0.66Hz (96) |
LFO 2 Delay / Fade | 0s (0) |
LFO 2 Shape | Ramp Down |
LFO 2 Key Sync | off |
LFO 2 Arp Sync | on |
LFO 2 Mono Mode | 0 |
LFO 2 Slew Rate | 20 |
Controls VCA Gain for All Voices.
function | type | destination | amount |
---|---|---|---|
volume | menu | VCA Gain for All Voices | 255 |
name | value |
---|---|
VCA Envelope Attack Time | 0.14s (24) |
VCA Envelope Decay Time | 13.49s (203) |
VCA Envelope Sustain Level | 100% (255) |
VCA Envelope Release Time | 19.19s (219) |
VCA Envelope Trigger Mode | Key (0) |
VCA Envelope Attack Curve | 128 |
VCA Envelope Decay Curve | 0 |
VCA Envelope Sustain Curve | 128 |
VCA Envelope Attack Curve | 0 |
Controls VCF Cut-off Frequency.
function | type | destination | amount |
---|---|---|---|
timbre | fader | VCF Cut-off Frequency | 169 |
name | value |
---|---|
VCF Envelope Attack Time | 1.43s (148) |
VCF Envelope Decay Time | 16.34s (211) |
VCF Envelope Sustain Level | 50% (128) |
VCF Envelope Release Time | 9.22s (191) |
VCF Envelope Trigger Mode | Key (0) |
VCF Envelope Attack Curve | 128 |
VCF Envelope Decay Curve | 0 |
VCF Envelope Sustain Curve | 128 |
VCF Envelope Attack Curve | 0 |
Controls HPF Cut-off Frequency.
function | type | destination | amount |
---|---|---|---|
timbre | matrix | HPF Cut-off Frequency | 0 |
name | value |
---|---|
Mod Envelope Attack Time | 1.59s (159) |
Mod Envelope Decay Time | 30.93s (252) |
Mod Envelope Sustain Level | 0% (0) |
Mod Envelope Release Time | 9.58s (192) |
Mod Envelope Trigger Mode | Key (0) |
Mod Envelope Attack Curve | 128 |
Mod Envelope Decay Curve | 158 |
Mod Envelope Sustain Curve | 128 |
Mod Envelope Attack Curve | 0 |